![]() |
Cast in Bronze - "Solo" Performance Rider(Click here for backline requested gear - ensemble) (Please Forward to Sound Company for Performance if applicable) For specific questions please contact my sound tech:Chris Gately - (610) 642-5058. All other inquiries should be directed to: “Cast in Bronze”, c/o Frank DellaPenna 2460 North Hill Camp Road Pottstown, PA 19465 Fax: (610) 469-0875 Toll Free: 800 601-6609 Email: FDP51@aol.com Power Requirements: 1-20 amp circuit for CARILLON, 1-20 amp circuit for sound. Sound Requirements:
CARILLON SPECIFICATIONS: The traveling carillon consists of 35 cast bronze bells. The bells are mounted on a custom frame and trailer weighing 8,370 lbs.. Its dimensions are 8' wide x 9’11” tall x 21’ long. TRUCK SPECIFICATIONS: The carillon is transported by a White/GMC Motor Home truck. The approximate weight of the truck is 29,000 lbs. (8’ wide x 12’6" tall x 37’ long). For overnight events I will need to have a camping site provided with access to electricity and water. PERFORMANCE SPECIFICATIONS: A stage is NOT required for a Cast In Bronze solo performance. For solo performances space is only required for the carillon and speakers at either end, approximately 40 feet will be required. Please see diagram. The carillon is an acoustic instrument and rather loud, therefore it cannot be turned down, nor can the music that accompanies the carillon, both have to be at the same volume for the show to have musical integrity. For this reason, it is recommended that the carillon not be placed too close to other vendors or musical artists, furthermore that performances not overlap with other musical artists performances. IMPORTANT THINGS NEEDED FOR PERFORMANCE OF “CAST IN BRONZE”
|
|
![]() |
![]() |